Personal Theatre

            System Specifications:

High Definition Audio /Video exacting specifications to get outstanding results:  based on 3 GHz. micro-processor system, large memory, 2 GB,  High Definition Cinema video card, direct X 9, 1920 X 1440 screen resolution, 24bit / 192KHz. based audio, 7.1 Surround Sound system for correct  audio playback.

System Specifications        Audio Specifications           Sound Monitor Specifications          Video Specifications        Projector Specifications

 

Ultimate Personal Theatre

A stand alone sectional High Definition Audio Center, made to fit any room.  It can be tailored to fit a client's budget and interior design.  It can be totally hidden in the ceiling, walls or appear as a contemporary digital entertainment unit.  It's available in many textures and finishes to fit with room design.  Available in most colors (polyurethane) etc;  natural wood grain finished in multiple coats of hand rubbed polyurethane or hand rubbed natural finish in Tung Oil.  This provides many decades of wear and beauty.  The Audio Center unit is based on the use of multiple reflections.  It produces an image based on a live performance, whether listening to a CD, VCR, DVD, TAPE, etc.

The Wall Unit version is a no compromise  Ten Track, Seven Way complete Multi-Media Audio Environment Unit, with Surround Sound and Dual Subwoofers.  ( 10.1 response)  The system comes complete based on MultipointUSA's Digital Entertainment Center with  audio components, tuner, power amps; etc.  The unit is of all hardwood construction primarily oak, ash and walnut.  Hardwoods have different characteristics, we take advantage of these differences to give the speaker enclosures a resonance not unlike that of the woodwind family of musical instruments.  Bonded and fastened "Tuned Resonator Grade Construction", sealed inside and out.  This gives the client many decades of enjoyment.  The unit comes with all drivers Sixteen of them, pre-wired with a MultipointUSA Matrix crossover unit power amplifiers and "Neutral Zone" filtered power source.  The rock of realism with power and definition to create an audible and visual illusion defining your perspective of reality.

The unit measurements vary depending on the client's requirements and budget.  Example: unit  built into the existing wall,  twelve inches deep depending area, plus the type of monitor or video screen used.  There are five sections which are twenty four inches wide, two for drivers, one for equipment rack and one for storage of tapes, CD's records, etc.  Comes with roll out drawers.  The fifth is expandable to any size screen, top and bottom contain drivers for the center channel.

Every enclosure or component we sell we construct in our shop and test in our lab.  All component parts are made in the U.S.A. to our exacting specifications.  This is the simplest solution the entire assembly fits into your space like a piece of furniture.

 

     

         Ultimate Personal Theatre                                 

 

 Fished space, designed from ground up (basement or family room) this way we control the overall response of the room.  The room can have many looks from conventional to contemporary.  The components are hidden in the walls, ceiling, floors even furnishings if desired.  This is very popular with customers who like  the look of a typical family or entertainment room without the atmosphere of component enclosures occupying floor space.  Even the grills of the enclosures are painted the same as the walls for a total blend in look, it also keeps the peace when talking about room design.

       Total Custom Theatre Experience             

At this point we can either design a complete theatre experience down to the last detail or the client can live out their fantasy.  With the aid of computer design (CAD) we can design almost anything the customer can dream up and match the  specifications to the room's response.

All designs given to customer are aided with Three Dimensional plans and pictures to show what the finished room will look like down to wall coverings, furnishing, fabrics etc.  So there are no surprises with the finished product.

This was done for a customer who did not have the space for a large set up.  But needed a bay window, so why not have both.  The ultimate  in reproduction,  granite enclosures with bay window and stone cactus garden  built right into the existing structure.   This set up made for outstanding bass response, while increasing the dimensions of the living space.   We have many solutions for interior design based on sound reproduction acoustics in a three dimensional space. 

A no compromise Architectural solution to an Audio and Video experience.  There are many levels of sophistication when it comes to interior design, but very few when it comes to the physical phenomena of the natural laws of nature pertaining to acoustics.  A room can be altered physically to be a better atmosphere for music reproduction.  This basically means more mass, and reflective surfaces that tune the room to set up the proper illusion.  Architecturally we use concrete, stone and hardwood trim, to design a proper solution to a rooms' physical characteristics.  Each room and client's requirements demand different solutions but the problem is basically the same, a room that is pleasing but acoustically correct.
 Tuned port Center Sub woofer or side fill enclosure featuring  Kevlar  8 inch x  12 inch x 15 inch speakers.  Also comes in (8" x 12" x 18" speakers) Solid 3 inch red oak reinforced  construction finished in hand rubbed Tung Oil finish.  w 42 inch x h 32 inch x d 18 inch at Weight 103 lbs.  without amplifiers.  Total weight with amplifiers 139 lbs.

  Enclosure is self powered by four 150watt continuous duty R.M/S.  (300watts peak x 600 watts punch) heavy duty USA amplifiers.  Amplifiers are fully encased, shielded steel enclosure.  Filtered by "Neutral Zone" power conditioner. 

            Sub-woofer Amplifier and Speaker  specifications

 

  ◄

                   Are you experienced ?    in the dynamics of "Total Realism"